Asus K8N-DL - Manual (Page 81)

A S U S K 8 N - D L A S U S K 8 N - D L A S U S K 8 N - D L A S U S K 8 N - D L A S U S K 8 N - D L 4 - 1 9 4 - 1 9 4 - 1 9 4 - 1 9 4 - 1 9
4.3.10 4.3.10 4.3.10 4.3.10 4.3.10 Third IDE Master Third IDE Master Third IDE Master Third IDE Master Third IDE Master
When configuring a drive as Primary IDE Slave, refer to section “4.3.6
Primary IDE Master” for the menu item descriptions which are not discussed
in this section.
Extended IDE Drive Extended IDE Drive Extended IDE Drive Extended IDE Drive Extended IDE Drive
When set to [Auto], allows automatic selection of the extended IDE drive
installed, if any. Set this item to [None] if there is no extended IDE drive, or
if you do not wish to detect the drive even if installed. Configuration
options: [None] [Auto]
Access Mode [Auto] Access Mode [Auto] Access Mode [Auto] Access Mode [Auto] Access Mode [Auto]
Allows selection of the sector addressing mode.
Configuration options: [Large] [Auto]
4.3.11 4.3.11 4.3.11 4.3.11 4.3.11 Fourth IDE Master Fourth IDE Master Fourth IDE Master Fourth IDE Master Fourth IDE Master
When configuring a drive as Fourth IDE Master, refer to section “4.3.6
Primary IDE Master” and section “4.3.10 Third IDE Master” for the menu
item descriptions.
4.3.12 4.3.12 4.3.12 4.3.12 4.3.12 IDE Channel 4 Master IDE Channel 4 Master IDE Channel 4 Master IDE Channel 4 Master IDE Channel 4 Master
When configuring a drive as IDE Channel 4 Master, refer to section “4.3.6
Primary IDE Master” and section “4.3.10 Third IDE Master” for the menu
item descriptions.
4.3.13 4.3.13 4.3.13 4.3.13 4.3.13 IDE Channel 5 Master IDE Channel 5 Master IDE Channel 5 Master IDE Channel 5 Master IDE Channel 5 Master
When configuring a drive as IDE Channel 5 Master, refer to section “4.3.6
Primary IDE Master” and section “4.3.10 Third IDE Master” for the menu
item descriptions.
F1:Help
↑↓ ↑↓ ↑↓ ↑↓ ↑↓
: Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→← →← →← →← →←
: Select Menu Enter: Select Sub-menu F10: Save and Exit
Phoenix-Award BIOS CMOS Setup Utility
Main
Select Menu
Item Specific Help
Set a PIO mode for the
IDE device. Mode0 through
4 successive increase in
performance.
Primary IDE Master
Extended IDE Drive [Auto]
Access Mode [Auto]
Capacity 0 MB
Cylinder 0
Head 0
Precomp 0
Landing Zone 0
Sector 0
Transfer Mode None
S.M.A.R.T Status None