Refrigerator installation, Fig. 5, Fig. 6 – LG LFX25978ST User Manual

Page 16

Advertising
background image

16

HOW TO REMOVE AND INSTALL THE PULL

OUT DRAWER (3 DOORS MODELS).

1. Removing Pull out Drawer

IMPORTANT: To avoid possible injury, product or
property damage, you will need two persons to
perform the following instructions.

• Pull the drawer open to full lower extension.

Remove the durabase by lifting it from rail system.
(Fig. 3)

Durabase

Fig. 3

• Remove the screws of the rail on both sides.
(Fig. 4)

screw

Fig. 4

CAUTION: When removing drawer door, do not

hold it by the handle. The door could fall down

and you may be injured. Grasp the door with both

hands as pictured below when removing.

CAUTION: When laying down the drawer, be

careful not to damage the floor or hurt your feet

with the sharp edges on hinge side.

• With both hands, hold both sides of the door

(Fig. 5) and pull it up to separate it from the rails.

(Fig. 6)

Fig. 5

REFRIGERATOR INSTALLATION

To remove the drawer, push the tabs located on

the front inside surface of each rail. Next,gently

lift the rear left and right sides of the drawer and

pull it out (Fig. 1)

To reinstall, pull out and fully extend both rails.

Insert the end of rib in the bracket at left and

right. Making sure that the guides at the front

are lined up properly, gently push downon both

sides (Fig. 2)

Fig. 1

Fig. 2

Fig. 6

Rail tabes

Door

supports

Advertising
This manual is related to the following products: