Care and cleaning, Gas surface burner, Removing and replacing the gas surface burner – LG LRG3083ST User Manual

Page 32: Burner heads/caps, Caution

Advertising
background image

ENGLISH

31

CARE AND CLEANING

ENGLISH

CARE AND CLEANING

Gas Surface Burner

Removing and Replacing the Gas Surface Burner

Grates and burner caps/heads can be removed for care and cleaning.

Burner Heads/Caps

For even and unhampered flame, the slits in the burner heads must be kept clean at all times. The burner heads and caps (and
the oval burner head and cap assembly) can be lifted off. Do not attempt to remove the oval burner cap.

y Wash the burner bases and caps in hot soapy water and rinse with clean water. Run water through the oval burner from the

bottom stem to flush out debris.

y Any spills on or around an electrode must be carefully cleaned.

y To remove burnt-on food, soak the burner heads in a solution of mild liquid detergent and hot water for 20–30 minutes.

For stubborn stains, use a toothbrush or wire brush.

y The burners will not operate properly if the burner ports or electrodes are clogged or dirty. Use a wire brush or pipe cleaner

to unclog ports on the oval burner.

y Burner caps and heads should be cleaned routinely, especially after bad spillovers.

y Burners will not light if the cap is removed.

CAUTION

y DO NOT clean this appliance with bleach.

y To prevent burns, wait until the cooktop has cooled down before touching any of its parts.

LRG3085 / LRG3083

side grate

side grate

center grate

Medium burner

head and cap

Oval burner
head and cap

Small burner
head and cap

Large burner

head and cap

Extra large burner
head and cap

LRG3081

side grate

side grate

center grate

Medium burner

head and cap

Medium burner
head and cap

Small burner
head and cap

Large burner

head and cap

Extra large burner
head and cap

General burner

Burner cap is properly set.

Burner cap is NOT

properly set.

Advertising
This manual is related to the following products: