LG LRG3083ST - Manual (Page 35)

34 CARE AND CLEANING
Removing and Replacing the
Oven Door and Drawer
Removing the Oven Door
1. F ully open the door. Pull the hinge locks away from the
oven interior, until they are fully unlocked. A tool, such as
a small flat-blade screwdriver, may be required.
2. Firmly grasp both sides of the door at the top.
Close the door to the removal position (approximately five
degrees from fully closed).
3. Lift the door up and out until the hinge arm is clear of the
slot. Put the door on the floor.
CAUTION
f7KHGRRULVYHU\KHDY\%HFDUHIXOZKHQUHPRYLQJDQG
lifting the door.
f'2127OLIWWKHGRRUE\WKHKDQGOH
f'2127KLWWKHJODVVZLWKSRWVSDQVRUDQ\RWKHU
object.
f6FUDWFKLQJKLWWLQJMDUULQJRUVWUHVVLQJWKHJODVVPD\
weaken its structure, causing an increased risk of
breakage at a later time.
Push hinge locks up to unlock
Hinge arm
Door frame
Slot
Hinge lock
Removal Position
About 5°
Replacing the Oven Door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position,
seat the indentation of the hinge arm into the bottom
edge of the hinge slot. The notch in the hinge arm must
be fully seated into the bottom of the slot.
3. Fully open the door. If the door will not fully open, the
indentation is not seated correctly in the bottom edge of
the slot.
4. Push the hinge locks down toward the bottom of the door
to the locked position. Close the oven door.
Slot
Hinge arm
Hinge lock
Door frame
Indentation
Bottom edge of slot
Hinge arm
Push hinge locks down to lock