Agilent Technologies J3972A - Manual (Page 124)

Download New Firmware
Downloading Firmware using an HP-UX Workstation and a Terminal
104
Figure 6-1: Probe Main Menu (HP-UX Workstation)
NOTE Item 5 in Figure 6-1 is not displayed if the Allow TFTP firmware downloads
menu item is disabled. Refer to “Modify/View Security Values” on page 24 for
more information on enabling this menu item.
If item 5 (TFTP Download new firmware) is not displayed, the number used to
access items 6, 7, and 8 will be different.
2. Press 5 to display the Download Menu as shown in Figure 6-2.
Figure 6-2: Probe TFTP Download Menu (HP-UX Workstation)
Main Menu - Revision
1. Modify/View configuration values ->
2. Modify/View security values ->
3. Modify/View interface values ->
4. Display interface summary
5. TFTP Download new firmware ->
6. XMODEM Download new firmware ->
7. Warm start and Exit
8. Cold start and Exit
TFTP Download Menu -- Firmware Rev.
1. Filename to download firmware
2. tftp server IP address X.X.X.X
3. Download firmware
0. Return to previous menu
Probe IP address: 0.0.0.0
Subnet mask: 0.0.0.0
Default gateway IP address: 0.0.0.0