Agilent Technologies J3972A - Manual (Page 128)

Download New Firmware
Downloading Firmware using a Networked PC and a Terminal
108
Figure 6-3: Probe Main Menu (Networked PC)
NOTE Item 5 in Figure 6-3 is not displayed if the Allow TFTP firmware downloads
menu item is not enabled. Refer to “Modify/View Security Values” on page 24 for
more information on enabling this menu item.
If item 5 (TFTP Download new firmware) is not displayed, the number used to
access items 6, 7, and 8 will be different.
2. Press 5 to display the Download menu as shown in Figure 6-4 on page 109.
Main Menu - Revision
1. Modify/View configuration values ->
2. Modify/View security values ->
3. Modify/View interface values ->
4. Display interface summary
5. TFTP Download new firmware ->
6. XMODEM Download new firmware ->
7. Warm start and Exit
8. Cold start and Exit