Acroprint ATR120 - Manual (Page 22)

18
2. Following the diagram, insert screws at
positions B and C. Place a screw anchor
in the wall at position D.
3. Use the two screws
(M4X10) to attach
the wall-mounted
frame to the bottom
of the time clock.
4. Line up the keyholes on the back of the time clock with
the screws in the wall. Slide the ATR120 downwards to
firmly mount it on the wall.
5. Place a screw in the bottom hole of the
wall-mounting frame to secure it to the
wall.
VII. Operating your ATR120
The Clock will print in the column indicated by the red light above the IN/OUT
buttons. Press the appropriate IN or OUT button to choose the print position for time
cards. The print position will not change until another column button is pressed. If
an auto shift schedule is programmed, then the ATR120 will automatically shift from
column to column. If manually changed, while in auto shift, the clock will return to
the programmed position after 7 or 8 seconds.
In Morning/Out Lunch IN Lunch/Out End of Day OT In/OT Out
IN1 OUT1 IN2 OUT2 IN3 OUT3