Acroprint ATR120 - Manual (Page 7)

3
III. Location of Components
1. Anti-dust cover
2. Time card receiver
3. In/Out advance buttons (6)
4. Analog clock (Clock dial)
5. Display
6. Program mode switch
7. Reset (return to original factory settings)
8. Wall-mounting keyholes
9. Fuse access door
IV. Getting started
Installing clock dial battery
The front cover must be opened before the clock dial battery can be installed.
Opening the front cover also allows you to set the clock's analog time. You will need
to do this occasionally to synchronize the clock dial to the digital display and printer.