LG HW350T - Manual (Page 21)

21 WATCHING PROJECTOR
Watching Projector
Watching Projector
1 In Standby mode, press the
POWER to turn the projector on.
2 Press INPUT and select desired
input.
3 Control the projector using the
following buttons while you are
watching projector.
Button Description
CH∧, ∨ Scrolls through saved
channels.
LIST Selects a channel on the
saved or recent watched
channel list.
0 - 9 Selects a channel by
entering numbers.
VOL -, + Adjusts the volume level.
MUTE Mutes all sounds.
Q.MENU Accesses the quick
menus. (See p.26)
FLASHBK Alternates between
the last two channels
selected.
RATIO Resizes an image.
Key's Adjusts Keystone. (See
p.25)
4 To turn the projector off, press the
POWER.
Turning on for the First
Time
1 Make sure the power cord is
connected correctly.
2 After wait for a moment, press
the POWER button on the remote
control or control panel. (The light
on the control panel will be turned
on.)
Check if the lens cap is removed
before turning on the power.
3 Follow the on-screen instructions to
customize your projector settings
according to your preferences.
Language Selects a language to
display.
➡
Time Zone Selects the time zone
and daylight saving.
4 Press the INPUT button on the
remote control to select the input
signal you want.
Focus and Position of
the Screen Image
When an image appears on the
screen, check if it is in focus and fits
the screen properly.
Focus ring
To adjust the focus of the image,
rotate the focus ring.