LG HW350T - Manual (Page 30)

30 ENTERTAINMENT
5 Press the Navigation buttons to
type in an IP address and press OK.
- PC Setting: Internet Protocol(TCP/
IP) of PC needs to be set
manually. IP address, Subnet
Mask, and default Gateway can
be set with your own discretion.
e.g.) IP address: 192.168.0.1 /
Subnet Mask: 255.255.255.0
/ default Gateway:
192.168.0.10
- Projector Setting: Verify IP
address and gateway of PC. Input
Gateway address of PC to IP
Address, and IP Address of PC to
Gateway, and select Enter.
e.g.) IP address: 192.168.0.10 /
Subnet Mask: 255.255.255.0
/ default Gateway:
192.168.0.1
6 Press the Navigation buttons to
select Close after Network setting
is completed.
7 Press the OK.
Tips for Network Setting
Many network connection problems
during set up can often be fixed
by re-setting the router or modem.
After connecting the player to the
home network, quickly power off
and/or disconnect the power cable
of the home network router or cable
modem. Then power on and/or
connect the power cable again.
Depending on the internet service
provider (ISP), the number of
devices that can receive internet
service may be limited by the
applicable terms of service. For
details, contact your ISP.
LG is not responsible for any
malfunction of the projector and/
or the internet connection failure
due to communication errors/
malfunctions associated with your
broadband internet connection, or
other connected equipment.
LG is not responsible for problems
within your internet connection.
Some content available through the
network connection may not be
compatible with the projector. If you
have questions about such content,
please contact the producer of the
content.
You may experience undesired
results if the network connection
speed does not meet the
requirements of the content being
accessed.