LG HW350T - Manual (Page 24)

24 WATCHING PROJECTOR
Using Additional
Options
Adjusting Aspect Ratio
Resize an image to view at its optimal
size by pressing RATIO while you are
watching projector.
NOTE
Some options may not be
available depending on input
signals.
You can also change the image
size by pressing Q.MENU or
MENU.
- FULL: Changes to the full screen
regardless of the aspect ratio.
- 16:9: Resizes images to fit the
screen width.
- Just Scan: Displays video images in
the original size without cutting off
the edges.
NOTE
If you select Just Scan, you may
see image noises at the edge or
edges of the screen.
- Set By Program: Displays images
in the same aspect ratio as the
original image.
- 4:3: Resizes images to the previous
standard.
- Zoom: Enlarges an image to fit the
screen width. The top and bottom
of the image may not appear.
Adjust proportion of Zoom, press
or .
Move the image on the screen,
press or .
- Cinema Zoom: Formats an image
to the cinemascope ratio, 2.35:1.
To change the ratio of the cinema
zoom, press or and its range
is from 1 to 16.
To move the zoom focus up or
down, press or .
NOTE
If you enlarge or reduce an image,
the image may be distorted.