Safety instructions, Indoor installation – LG HW350T User Manual

Page 3

Advertising
background image

3

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS

Please take note of the safety instructions to prevent any potential accident
or misuse of the projector.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.

Indoor Installation

WARNING

Do not place the Projector in direct
sunlight or near heat sources such as
radiators, fires, stove etc.
- This may cause a fire hazard.

Do not place flammable materials in,
on or near the projector.
- This may cause a fire hazard.

Do not hang on the installed projector.
- It may cause the projector to fall,

causing injury or death.

Do not block the vents of the projector
or restrict air-flow in any way.
- This would cause the internal

temperature to increase and could
cause a fire hazard or damage to the
unit.

Do not place the projector close to
sources of steam or oil such as a
humidifier.
- This may create a fire hazard or an

electric shock hazard.

Do not place the projector where it
might be exposed to excessive dust.
- This may cause a fire hazard or

damage to the unit.

Do not use the projector in a damp
place such as a bathroom where it is
likely to get wet.
- This may cause a fire or an electric

shock hazard.

The lightning flash with
arrowhead symbol, within
an equilateral triangle,

is intended to alert the user to
the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may
be of sufficient magnitude to
constitute a risk of electric shock
to persons.

The exclamation point
within an equilateral
triangle is intended to

alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.

WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE

AND ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.

Advertising