LG HECTO - Manual (Page 41)

41 Network Features
Wireless Network Connection
You can use a wireless network by using the built-in wireless network module as shown
below.
A wireless router must be installed and operating at this time. Refer to the wireless
router's user manual to see how to install it.
The network settings and connection may be different depending on the network
environment. Set up the router as instructed in its user manual.
RS-232C IN
LAN WAN
Ethernet
@
Wireless
Router
Internet
Cable Modem
Wireless Network Setup
This function allows you to use the wireless connection e.g., Wi-Fi Direct and WiDi.
You can share the screen of the device connected by the Wi-Fi Screen Share on the
SmartShare.
Turn on the Wi-Fi Screen Share. A list of devices available for connection is displayed.
Select a device to connect. A connection request message is displayed. Select Yes.
The Wi-Fi Screen Share is then connected.
1
Press the SETTINGS button.
2
Use the , , or button to select NETWORK and press the OK button.
3
Press the , , or button to select Wi-Fi Screen Share and then press the
OK button.