LG HECTO - Manual (Page 48)

48 SmartShare™
Tips for Using a USB Device
• A USB device which has a built-in
automatic recognition program or
uses its own driver might not be
recognizable.
• Some USB devices may not be
supported or will not work properly.
• Please use only a USB device
formatted as a FAT32 or NTFS file
system provided by Windows.
• It is recommended to use an external
USB hard disk with rated voltage
of 5V or less and rated current of
500mA or less.
• It is recommended to use a USB
hub or hard disk drive with power
supplied. (If the power supplied is not
enough, the USB device may not be
detected properly.)
• It is recommended to use a USB
memory stick which is 32 GB or less
and a USB hard drive which is 2 TB
or less.
• If a USB external hard drive with
the power saving function does not
work, turn the hard drive off and on
again to make it work properly. See
the owner's manual of the USB hard
drive for more information.
• The data of a USB device may be
damaged, so it is recommended
to back up any important files.
Users are responsible for data
management. The manufacturer
bears no responsibility.
Supported Files for SmartShare™
• Maximum data transmission rate:
20 Mbps (Megabit per second)
• Supported external subtitle formats:
*.smi, *.srt, *.sub (MicroDVD,
SubViewer 1.0/2.0), *.ass, *.ssa,
*.txt (TMPlayer), *.psb (PowerDivX)
• Supported internal subtitle formats:
XSUB (subtitles from DivX6 are
supported)