Tips for network setup – LG HECTO User Manual

Page 42

Advertising
background image

42 Network Features

Tips for Network Setup

Modem reconfiguration may cause

network connection problems. If

it does, turn off the modem and

disconnect it from the product; then

turn on the modem again. It will be

working normally.

LG Electronics is not responsible for

any Internet connection problems, or

any failure, error or malfunction due

to your Internet connection.

The network connection may not

be working properly because of the

Internet Service Provider (ISP).

DSL service requires a DSL modem,

and cable service requires a cable

modem. Internet connections may be

limited due to an agreement with an

Internet service provider (ISP) and

the Laser TV may not be connected

to a network. (When only one device

is allowed per line and a PC is

already connected, other devices are

not available for use.)

The wireless network may be

affected by interference from a device

that uses 2.4 GHz frequency, such

as a wireless telephone, Bluetooth

device or microwave. Interference

may also be caused by a device that

uses 5 GHz frequency such as Wi-Fi

devices.

The wireless network service may

run slowly depending on surrounding

wireless environment.

Some devices may have network

traffic jam if any of local home

networks is turned on.

To connect to a wireless router,

a router that supports wireless

connection is necessary; the

wireless connection function of

the corresponding router must

also be activated. Ask the router

manufacturer whether the router

supports wireless connection.

To connect to a wireless router, verify

the SSID and security settings of

the wireless router. Please refer to

the user guide of the corresponding

router regarding SSID and security

settings of the wireless router.

The Laser TV may not slow down

or malfunction if network devices

(wire/wireless router or hub, etc.) are

incorrectly set up. Be sure to install

the devices correctly by referring to

their user guides before configuring

the network connection.

When Ad-hoc is used, it may not be

able to connect depending on the

device (for example, laptop) that is

connected.

The connection method may vary

according to the manufacturer of the

wireless router.

Advertising