LG HECTO - Manual (Page 94)

94 Serial Communication Function
08. Sharpness (Command: kk)
⇒ Adjusts screen sharpness.
Transmission
[k][k][][Set ID][][Data][Cr]
Data Min: 0H - Max: 32H
(* Transmitted in hexadecimal code)
* See the data structure.
Ack
[k][][Set ID][][OK][Data][x]
Data Min: 0H - Max: 32H
09. OSD Control (Command: kl)
10. Key Lock (Command: km)
11. Color Temperature
(Command: ku)
⇒ Selects OSD On/Off.
Transmission
[k][l][][Set ID][][Data][Cr]
Data 00: OSD selection mode off
01: OSD selection mode on
Ack
[l][][Set ID][][OK][Data][x]
Data 00: OSD selection mode off
01: OSD selection mode on
⇒ To Set the function of locking the remote
control and front panel control on the Laser
TV.
Transmission
[k][m][][Set ID][][Data][Cr]
Data 00: Disables the key lock.
01: Enables the key lock.
Ack
[m][] [Set ID][][OK][Data][x]
Data 00: Disables the key lock.
01: Enables the key lock.
► This function is configured when the keys on the
remote control or control panel are not used. If
the unit is fully discharged after its power plug
is pulled out of a wall outlet, the LOCK function
is cleared.
► If the unit is in the key lock standby mode, the
cinema beam TV will not respond to the power
button on the remote control or control panel.
⇒ Adjusts the value of color temperature.
Transmission
[k][u][][Set ID][][Data][Cr]
Data 00: Medium 01: Cool
02: Warm 04: Medium
(* Transmitted in hexadecimal code)
*Data 03 is not used.
Ack
[u][][Set ID][][OK][Data][x]
Data 00: Medium 01: Cool
02: Warm 04: Medium