LG LRV790R - Manual (Page 28)

26
MOP CLEANING (OPTION)
1. Attach the ultra microfiber mop to the Velcro
of the mop plate as shown in the figure.
2. Firmly push the Mop Plate into the furrows
until you hear a 'click' sound.
※ Note that, if the Mop Plate is not secured
correctly, it may separate during the
cleaning.
3. It is essential that the fixing hooks on the Mop
Plate align correctly on to the fixing grooves
on the underside of the cleaner.
For mop cleaning, mount the mop and mop plate to the Hom Bot according to the following instructions:
By attaching the ultra microfiber mop, you can
effectively use the Hom Bot to remove dust.
When the mop plate is attached, the Hom Bot will
not climb on to carpets or over thresholds, in order
to prevent transferring dirt from the mop.
• To avoid odors, wash any foreign material or dust off the mop after cleaning is complete.
• To avoid staining floors, do not use the ultra microfiber mop to clean when dirt is mixed with
liquids such as coffee or ink.
• To avoid damage to carpets from the Velcro or dirt transfer from the mop, do not clean the
carpet while the mop plate or mop is attached.
• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.
If there is moisture, it can interfere with the navigation.
• Smart Diagnosis feature is not available, when the Mop Plate is attached.
Fixing hook
Fixing groove
“Click!”
Tip
Caution
Do not cover the bottom camera
with the microfiber mop. It can
cause the vacuum to malfunction.