Alliance Laundry Systems BF50PV - Manual (Page 52)

Maintenance
50
F232058
Daily Preventive Maintenance Checklist
Machine ____________________________
Operator ___________________________
Week Of: ________________
Days
Checks 1 2 3 4 5 6 7
Observe All Safety Warnings!
Beginning of Day
1. Inspect water inlet valve hose connections on the back of
the machine for leaks.
2. Inspect steam hose connections for leaks, where
applicable.
3. Verify that insulation is intact on all external wires and
that all connections are secure.
4. Inspect door lock and interlock before starting operation:
a. Attempt to start the washer with door open.
b. Close the door without locking it and attempt to start
the washer.
c. Close and lock the door, start a cycle, and attempt to
open the door while the cycle is in progress.
5.
End of Day
1. Clean the AC drive box filter(s).
2. Clean motor cooling fan filter.
3. Clean the door gasket of all foreign matter.
4. Clean automatic supply dispenser and lid.
5. Clean the washer’s top, front, and side panels.
6. Leave loading door open at the end of each day to allow
moisture to evaporate.
7.
Note: Unload the machine promptly after each completed cycle to prevent moisture buildup .
Note: Leave loading door open after each completed cycle to allow moisture to evaporate.
Note : Improper replacement of the AC drive box filter will result in clogging of the pump.