APC REMOTE POWER-OFF DEVICE AP9830 - Manual (Page 2)

Remote Power-Off Device — Installation and Quick Start
Contents
Features and Requirements 1
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hardware Requirements . . . . . . . . . . . . . . . . . . . . 2
Safety Information 3
Avoid Hazardous Configurations . . . . . . . . . . . . . . 3
Example of the potential hazard 3
Accessory devices that can override the RPO 3
Eliminate the Hazard . . . . . . . . . . . . . . . . . . . . . . 4
Use an Emergency Power Off system 4
Block access to accessory devices 5
Contact Closure Setup with Multiple UPSs . . . . . . . 6
Verify Contents of the Shipment 7
Unpack and Inspect the RPO Package . . . . . . . . . . 7
Please recycle 7
Receiving inspection 7
Components of the RPO 9
Side Views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
View from the server side of the RPO 9
View from the UPS side of the RPO 9
Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Configuration and Setup 11
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Configure the Remote Power-Off Device . . . . . . . 12
Types of remote switches supported 12