ArcSoft Wing HERA110 - Manual (Page 188)

188 Getting Connected
To enable auto selection of an available connection
If you have created more than one GPRS/EDGE connection, you can set your
device to connect to the best available connection automatically.
1. Tap Start > Settings > Connections tab > Connections.
2. Under T-Mobile Data, tap Manage existing connections.
3. Select Auto pick, then tap OK.
11.5 Dial-up and Other Connections
Dial-up
When you use your device to dial up to your Internet Service Provider (ISP)
and connect to the Internet, you will be billed by the number of minutes
that you use.
To set up a dial-up connection to your ISP
To establish a dial-up connection on your device, you need the same
settings that you normally use when you dial up from your computer. This
includes the ISP server phone number, your user name and password.
1. Tap Start > Settings > Connections tab > Connections.
2. Under T-Mobile Data, tap Add a new modem connection.
3. On the Make New Connection screen, enter a name for the
connection.
4. In the Select a modem list, select Cellular Line, then tap Next.
5. Enter the ISP server phone number, then tap Next.
6. Enter your user name, password, and any other information required
by your ISP.
7. Tap Finish.
Work network connections
A Virtual Private Network (VPN) connection allows you to access your
company network through your device’s Internet connection. Whereas a
proxy connection lets you access the Internet using an existing connection
to your corporate or WAP network.