ArcSoft Wing HERA110 - Manual (Page 197)

Getting Connected 197
4. Tap the name of the Bluetooth
headset, then tap Next.
5. Enter the passcode of the Bluetooth
headset, then tap Next.
Note Common passcodes are 0000
and 1234. If these do not work,
then refer to the headset
documentation for the code.
6. Make sure the Hands Free check box
is selected. If you have a Bluetooth
stereo headset, also make sure
Wireless Stereo is selected.
7. Tap Finish.
While the Bluetooth stereo headset is connected, the Headset icon ( )
will appear on the title bar.
Note If the Bluetooth stereo headset becomes disconnected, turn the headset on
and repeat steps 1 to 3 above. Tap and hold the name of the Bluetooth stereo
headset and tap Set as Wireless Stereo.
Beam information using Bluetooth
You can beam information, such as contacts, calendar items, and tasks, as
well as files from your device to your computer or to another Bluetooth-
enabled device.
Note If your computer does not have built-in Bluetooth capability, you need to
connect and use a Bluetooth adapter or dongle on your computer.
To beam information from your device to a computer
1. Turn on Bluetooth on your device, and make your device visible. For
information about this, see “To turn Bluetooth on and make your
device visible”.
2. Next, set Bluetooth on your computer to visible mode, create a
Bluetooth partnership, then enable your computer to receive
Bluetooth beams.