Oa-740 (4-slot chassis) 11, Slot numbers 11, Led status 11 – Alcatel-Lucent OMNIACCESS 740 User Manual
Page 19: Beta
Hardware Overview
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
11
Alcatel-Lucent
Beta
Beta
OmniAccess 740 Hardware User’s Guide
S
LOT
N
UMBERS
The slots in the front panel are numbered 0 through 3, from left to right.
The table below lists the slot number and the component associated with it.
Table 2: Slot Numbers
Figure 5: OA-740 (4-Slot Chassis)
LED I
NFORMATION
The following table shows the state of the main LEDs after startup.
Table 3: LED Status
Slot Number
Location
Slot Type
Card Associated With the Slot
Number
0
Front Panel
Single
Line Card
1
Front Panel
Single
Line Card
2
Front Panel
Dual
SE
3
Front Panel
Dual
SE
LED
Status
Description
SE LEDs
Active
Off
Power up status. This is the default
display when the system is first
powered on and before the software is
loaded.
Green
SE card is active.
Yellow
Indicates transient conditions (e.g.,
booting).
OmniAccess
740
USB
Modem
Console
0
1
2
3