Installing fillers, Installing line card 40, Beta – Alcatel-Lucent OMNIACCESS 740 User Manual
Page 48
Installing the OmniAccess 740
Left running head:
Chapter name (automatic)
40
Beta
Beta
OmniAccess 740 Hardware User’s Guide
Alcatel-Lucent
Figure 14: Installing Line Card
R
EMOVING
THE
L
INE
C
ARDS
To remove the line card, loosen the thumb screws provided on the line card and
pull the line card out of the slot.
I
NSTALLING
F
ILLERS
Fillers are used to cover unused slots. The procedure to install different types of
fillers is outlined below.
Step 1: Insert the filler in the empty slot.
Step 2: Verify that the filler is rested on the guide and rides smoothly in the slot.
Step 3: Push the filler firmly and ensure that the filler is fully inserted in its
respective slot and tighten the screws.
R
EMOVING
F
ILLERS
To remove the filler for the line card slots, loosen the thumb screws provided on
the line card and pull the filler out of the slot.
OA7-T1E1-4
OA7-6E-8
OA7-SE
OmniAccess
740
USB
Modem
Console