Alcatel-Lucent OMNIACCESS 740 - Manual (Page 57)

Performing Basic Configuration Tasks
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
49
Alcatel-Lucent
Beta Beta
OmniAccess 740 Hardware User’s Guide
Step 12: Enable HTTP & HTTPS for web-based management.
• HTTP is the primary protocol used for the transfer of files over the World Wide
Web. You can access the OA-700 using HTTP through a web browser after being
authenticated.
http {enable|disable}
Example:
ALU(config)# http enable
• HTTPS, in addition to the normal HTTP uses SSL encryption for secure
transmission of files.
Example:
ALU(config)# https enable
Step 13: Enable Modem for Out of Band Management.
modem {enable|disable}
Example:
ALU(config)# modem enable
Step 14: Show Chassis - The ‘show chassis’ command provides a physical
inventory of the running chassis components for a specific slot or for the entire
system.
Example:
ALU> show chassis
Physical inventory at Tue Oct 30 12:31:50 2007
System started approximately Tue Oct 30 12:30:32 2007
Uptime is 0 days 0 hours 3 minutes 40 seconds
T1E1 - Four port T1E1 (active)
Slot number: 0
Part number: 902604-90
Manufacturer: ALU
Description: Four port T1E1
Serial number: ND0533001165
Version: 00
Revision: 55
Deviation: 0000
Loader version: 2.29
ALU-OS version: 2.2.57
SE - Service engine (active)
Slot number: 3
Part number: 902601-90
Manufacturer: ALU
Description: Service engine
Serial number: DD0538002041
Version: 01
Revision: 02
Deviation: 0001
Opteron CPU Version: 10
Opteron CPU Frequency: 1994 MHz
LoL firmware version: 2.2.56
Loader version: 2.29