ALESIS ANDROMEDA A6 - Manual (Page 209)

Chapter 10: Using Effects
A NDROMEDA A6 R EFERENCE M ANUAL 207
MOD: M ODULATING E FFECTS S END /O UTPUT
Pressing an effect’s MOD button on the top panel, or pressing soft button 8 ( MOD ) while
on any Effects Edit page displays a Modulation page for the Analog Distortion or
Digital Effects systems. Here you are able to select up to two sources that can be used
to modulate output levels of the Analog Distortion or Digital Effects sections.
The Modulation page will display the modulation destination(s) and its sources,
along with LEVEL , OFFSET and ENABLE controls. Pressing the MOD key on the top
panel of the Analog Distortion or Digital Effects section has the same effect as
turning
ENABLE on and off on the display. Turn soft knob 1 to set the SOURCE for the
mod from among the 79 possible choices.
When a mod source is selected, its effect on the destination is heard instantly while
scrolling through the list. Any changes made will remain active so long as you do not
switch Programs or Mixes. They will only be saved when you press the
STORE button
and save the entire Program or Mix.