ABC Office ROYAL 110CX - Manual (Page 14)

9
1. Open the printer cover as described on Page 10 and move the control switch to the "R1 or "R2" position.
2. Remove the battery cover, located at the back of the printer mechanism. (Figure B).
3. Position the batteries as indicated (Figure C) making sure that the positive and negative poles are aligned
correctly.
4. Replace the battery cover by sliding down in position. (See Figure D).
5. Close the printer cover.
THE BACK-UP BATTERY SYSTEM
__________________________________________________________________
During cash register operations, all transaction data for the management report is stored in the register's memory. The memory
also holds all the optional program information. The memory back-up system keeps this information stored in memory when the
cash register is turned off.
The memory is protected by 4 standard "AA"(1.5-Volt) batteries that must be installed before programming the register. Batteries
are not included with the 110cx register. These must be purchased separately.
When properly installed, these batteries provide back-up power to the register memory if the power cord is accidentally
disconnected or if a power interruption occurs. The daily transactions and locked in grand total will be retained by the machine
without (AC) power because of the memory protection feature. Average battery life protection is approximately 30 days after
power interruption.
TO INSTALL OR REPLACE BATTERIES:
NOTE: It is important that the unit is plugged in before the batteries are installed.
NOTE: In order to assure continuous battery back-up protection, it is important that the batteries be changed at least once every
year.
abcoffice
www.abcoffice.com 1-800-658-8788