AMX TPI-PRO-2 - Manual (Page 146)

Appendix
140 TPI-PRO Total Presentation Interface - Pro Edition
List of Available Pixel Display and Refresh Rates
The following list describes the available pixel display and refresh rates.
List of Touch Monitors and USB Touch Drivers
Tested with the TPI-PRO
Refer to www.amx.com for list of latest supported serial touch monitors and USB touch monitors.
TakeNote™
You can demonstrate truly interactive presentations using AMX’s TakeNote annotation application,
NXA-USBTN (FG070-603). TakeNote enables you to use your finger or a stylus to draw directly on the
Modero screen. The resulting annotations are displayed both on Modero and the PC. TakeNote even
supports multiple users for the ultimate collaborative environment. TakeNote is included with your
TPI-PRO on a USB stick (FIG. 54).
This 64MB USB Control Stick contains everything you need to implement both Computer Control and
TakeNote functionality including:
The amxCC server application
The configCC configuration utility
NetLinx cc-GuestPC Code Module
Sample Code and Programming/Configuration Pages
AMX TakeNote on-screen annotation application
To annotate over video using the TakeNote application, you must install a video card into a PC which is
connected to the TPI-PRO. For more information on configuring and using TakeNote, consult the
TakeNote Quick Start Guide included with the TakeNote USB Control Stick.
• 640 x 480@60Hz • 1024 x 768@60Hz • 1600 x 1200@60Hz
• 640 x 480@72Hz • 1024 x 768@70Hz • 1680 x 1050@60Hz
• 640 x 480@75Hz • 1024 x 768@75Hz • 1920 x 1080@60Hz (rb)
• 800 x 600@60Hz • 1280 x 720@60Hz • 1920 x 1200@60Hz (highest setting)
• 800 x 600@72Hz • 1280 x 1024@60Hz (default)
• 800 x 600@75Hz • 1360 x 768@60Hz
The TPI-PRO KIT firmware file must be downloaded before downloading the latest
TPI-PRO Drivers file (v2.3.14). The latest release of the Drivers file is incompatible
with previous versions (2.2.7 and before) of the TPI-PRO firmware.
Touch driver kit file v2.3.14 can be downloaded only to TPI-PRO board with main
firmware v2.3.14 or higher version.
FIG. 54 NXA-USBTN - TakeNote USB Computer Control Stick