AMX TPI-PRO-2 - Manual (Page 67)

Firmware Pages and Descriptions
61 TPI-PRO Total Presentation Interface - Pro Edition
G4 Web Control Page
The G4 Web Control page (FIG. 46) centers around enabling and disabling both the display and control
of your TPI-PRO (via the web). An external PC running a VNC client (installed during the initial
communication to the G4 device) makes this possible.
Each G4 device supports the open standard Virtual Network Computing (VNC) interface. This device
contains a VNC server which allows it to accept a connection from any other device running a VNC
client. Once a connection is established to that target device, the client can control the TPI-PRO
remotely. The elements of the G4 Web Control page are described in the table below:
FIG. 46 G4 Web Control page
G4 Web Control Page Elements
Back Saves the changes and returns you to the previously active touch panel page.
Connection Status icon This visual display of the connection status allows the user to have a current
update of the TPI-PRO’s connection status regardless of what page is currently
active.
• A Lock only appears on the icon if the TPI-PRO has established a connection
with a currently secured target Master (requiring a username and password).