AMX TPI-PRO-2 - Manual (Page 23)

Wiring and Device Connections
17 TPI-PRO Total Presentation Interface - Pro Edition
Connector Details and Pinout Configurations
The following sections describe in detail each of the connectors on the the TPI-PRO:
VIDEO/VGA INPUT Connectors
The Video/VGA Input connectors are used for source input devices (4 on the TPI-PRO-4, 2 on the
TPI-PRO-2). Each connector supports VGA graphics, S-video, composite video, and component video.
The TPI-PRO routes the video from the connected input devices to any connected output devices.
VGA OUTPUT (HD-15) Connectors
Each TPI-PRO has two VGA Output connectors. You can connect the VGA source equipment HD-15
(male) connector (from the touch device) to the VGA OUT HD-15 high-density connector (female) on
the rear panel of the TPI-PRO. The output devices display video from source input devices routing
through the TPI-PRO.
FIG. 11 VIDEO/VGA INPUT Connectors
FIG. 12 VGA Output Connectors