Washing drum, Door seal, Drain pump – AEG LAVAMAT 86850 User Manual

Page 33

Advertising
background image

33

Care and cleaning

2. Remove the conditioner insert from the

middle compartment.

3. Clean all parts with water.

4. Put the conditioner insert in as far as it

will go, so that it is firmly in place.

5. Clean all parts of the washing ma-

chine, especially the nozzles in the top of the washing-in chamber, with a
brush.

6. Insert the detergent dispenser drawer in the guide rails and push it in.

Washing drum

Rust deposits in the drum may occur due to rusting foreign bodies in the
washing or tap water containing iron.

Important! Do not clean the drum with acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.

1. Remove any rust deposits on the drum with a cleaning agent for stainless

steel.

2. Run a washing cycle without any washing to clean off any cleaning agent

residues. Programme: COTTONS/LINEN 90° or 95°C, press the button

6

, add

approx. 1/4 measuring cup of detergent.

Door seal

Check from time to time the door seal and eliminate
eventual possible objects that could be trapped in the
fold.

Drain pump

The pump should be inspected regularly
and particularly if

the machine does not empty and/or
spin

the machine makes an unusual noise
during draining due to objects such as
safety pins, coins etc. blocking the
pump.

Proceed as follows:

1. Disconnect the appliance.

2. If necessary wait until the water has cooled down.

132966571.qxd 21/01/2008 16.14 Pagina 33

Advertising