AEG LAVAMAT 86850 - Manual (Page 42)

42 Installation
Installation
Unpacking
All transit bolts and packing must be removed before using the appliance.
You are advised to keep all transit devices so that they can be refitted if the
machine ever has to be transported again.
1. After removing all the packaging, carefully
lay machine on it’s back to remove the
polystyrene base from the bottom.
2. Remove the power supply cable and the draining hose
from the hose holders on the rear of the appliance.
3. With a suitable spanner unscrew and remove the central
rear bolt A.
HEC0008
A
HEC00022
HEC0001
132966571.qxd 21/01/2008 16.14 Pagina 42