Ampro Corporation 486E - Manual (Page 90)

Little Board™/486e Technical Manual
2–74
SETUP Page 1—Standard (CMOS/EEPROM) Setup
The first SETUP page contains the parameters normally saved in CMOS RAM plus some additional
parameters unique to the Little Board/486e CPU. The only parameters not auto saved in the
EEPROM memory are the real-time clock date and time. If no battery is used or if the battery fails,
the date and time will not be accurate. All other parameters are saved in the EEPROM.
Figure 2–13 shows what can be configured using SETUP page 1. Sections following the figure
describe each option.
Figure 2–13. SETUP Page 1
Date (mm/dd/yyyy) 00/00/0000 Time (hh:mm:ss) 00:00:00
1st Floppy 1.4M
2nd Floppy None
Cyls. Heads Sectors Precomp
ATA/IDE Disk 1 Auto
ATA/IDE Disk 2 None
Video EGA/VGA
Base Memory 640
Extended Memory 3072
Error Halt HALT ON ALL ERRORS
System POST Normal
Standard (CMOS/EEPROM) Setup
PGDN or (D)own for Extended Setup
[Enter] moves between items, + - Selects values
(E)xit to quit without change, or (S)ave to record changes