Ampro Corporation 486E - Manual (Page 94)

Little Board™/486e Technical Manual
2–78
SETUP Page 2—Options/Peripheral Configuration
Use SETUP page 2 to enable or disable many of the functions and peripherals provided on the
Little Board/486e CPU. Figure 2–14 shows what can be configured on SETUP page 2, and the
sections that follow describe each parameter.
Figure 2–14. SETUP Page 2
Extended BIOS
The Ampro Extended BIOS is normally enabled allowing access to SETUP pages three and four and
the features they define. If the BIOS extensions are not used they can be disabled with this
parameter. Some UNIX implementations or other operating systems may require disabling the
extended portion of the BIOS. Application Notes and other documentation describing the specific
Ampro extended BIOS services and how they are used are available from Ampro Technical Support.
(S)ave to Record Extended Setup
[Enter] Moves Between Items, + - Selects Values
PgUp or (U)p for previous page, PgDn or (D)own for next page
LB/486e Options/Peripheral Configuration
Little Board Extended BIOS...Enabled
Advanced Power Mgmt BIOS.....Disabled
Serial Port 1................Enabled
Serial Port 2................Enabled
Serial Port 3................Enabled
Serial Port 4................Enabled
Floppy Interface.............Enabled
IDE/ATA Interface............Enabled
Mono/Color Jumper............Color
OnBoard DIP Socket...........Disabled
Local Bus Video Display......CRT&FP
Flat Panel Display Type......8
Video State..................Enabled
Blank Post Test..............Disabled
Serial Boot Loader...........Disabled
Watchdog Timer...............Disabled
Hot Key Setup................Enabled