HP xw4400 Workstation - Manual (Page 28)

3. Press CTRL-C when indicated to begin RAID configuration and enter the LSI Logic MPT Setup
Utility. The first screen displays a list of available adapters. The LSI 3041E plug-in card appears
on this list as the SAS1064E, the LSI onboard controllers are listed as the LSI1064 or LSI1068.
This screen can be used to change the boot order of the adapters.
Figure 6-2 LSI Logic MPT Setup Utility – Adapter selection
4. Press Enter to select and configure the highlighted adapter from the list. The next screen displays
properties of the selected adapter. Information on the attached drives, any RAID arrays present,
and more advanced adapter properties is available.
Figure 6-3 LSI Logic MPT Setup Utility – Adapter properties
24 Chapter 6 Installing and configuring SAS hardware RAID