HP xw4400 Workstation User Manual
Page 30
Advertising
6.
To create a new array, select one of the options to create either an IM, IME, or IS volume and
press
Enter
. IM, or Integrated Mirroring, is also known as RAID-1. IME, or Integrated Mirroring
Enhanced, is RAID-10. IS, or Integrated Striping, is RAID-0. The next screen lists the disks. For
each disk to be part of the array, move to the column labeled RAID Disk, and press the
Space
Bar
to add the disk to the array. The next column, Hot Spr, can be used to mark disks to be hot
spares in case of disk failure. When the disks have been marked as desired, press
C
to create the
array.
Figure 6-5
LSI Logic MPT Setup Utility – Array creation
26
Chapter 6 Installing and configuring SAS hardware RAID
Advertising
This manual is related to the following products: