HP xw4400 Workstation - Manual (Page 37)

9. The next screen displays the physical disks on the left and the proposed virtual disk (RAID array)
on the right as a preview of the proposed disk configuration. If changes are needed, select Back
to go back and change details of the configuration, or select Accept to accept the configuration.
On the next screen, select Yes to save the configuration, then click Yes to initialize the new RAID
array.
Figure 6-13 Foreign configuration on LSI adapter
10. If a disk in the RAID array fails or needs to be replaced for any reason, you can easily use the
WebBIOS utility to rebuild the RAID array. If a disk failure occurs, a message that indicates the
change to the RAID array appears on the screen before you enter the utility.
LSI 8344ELP, LSI 8888ELP, and LSI 9260-8i Setup 33