HP Tower Uninterruptible Power System - Manual (Page 11)

Component identification 11
Item Description
10 Cord retention clip attachment locations
11 Ground bonding screw
12 REPO port
13 Power cord with L6-20 plug
R/T3000 INT rear panel
Item Description
1 Option slot
2 USB port
3 Serial communications port
4 Load segment 1 (one IEC-320-C19 receptacle)
5 Load segment 2 (one IEC-320-C19 receptacle)
6 Load segment 1 (three IEC-320-C13 receptacles)
7 Load segment 2 (three IEC-320-C13 receptacles)
8 ERM connector
9 Cord retention clip attachment locations
10 Ground bonding screw
11 REPO port
12 Input power receptacle (IEC-320-C19) for country-specific plug
attachment
REPO port
The UPS includes an isolated REPO port. When properly wired, the REPO feature enables the power at
the UPS output receptacles to be switched off from a remote location. To use this feature, the REPO port