HP NonStop G-Series - Manual (Page 85)

SDR Commands
HP NonStop SQL DDL Replicator User’s Guide —545799-005
6-21
ALTER FILE
specifies whether buffered writes are performed. If NO BUFFERED is
specified, writes are not buffered.
The default is buffered mode for audited files and not buffered for non audited
files.
CLEARONPURGE | NO CLEARONPURGE
erases disk free space when files are purged.
CODE file-code
numeric file code of the file. file-code is an integer between 0 and 65535.
Codes 100 to 999 are reserved for use by HP.
LOCKLENGTH key-length
the byte count of the record key for generic locks. key-length is between 0 and
the key length of the file.
MAXEXTENTS size
the maximum disk allocation extents. size is an integer between 16 and 978,
where the maximum value depends on the free space in the file label.
NOPURGEUNTIL day-month-year
date after which a PURGE of the file is allowed. For example: 28 Feb. 2001
OWNER group-num, user-num
the user ID of the owner of the files. For example: 100,004.
RESETBROKEN
resets BROKEN flag in the file label for non audited files.
SECURE “rwep”
Guardian security string.
SERIALWRITES | NO SERIALWRITES
specifies whether serial writes to the mirrored disk are performed. If NO
SERIALWRITES is specified, parallel writes are performed. The default is NO
SERIALWRITES.
VERIFIEDWRITES | NO VERIFIEDWRITES
sets the mode of file writes: verified or not verified. The default is NO
VERIFIEDWRITES.