HP NonStop G-Series - Manual (Page 89)

SDR Commands
HP NonStop SQL DDL Replicator User’s Guide —545799-005
6-25
COPY
number of bytes between 1 and 32767 in an input block that is requested in a
single physical read operation. When BLOCKIN is not specified, the RECIN
value is used. The default is device dependent: 80 bytes for terminal, 132
bytes for process and unstructured files.
COMPACT | NO COMPACT
zero length records should (or should not) be skipped when copied to the
output file. The default is COMPACT.
COMPACT applies only for copying relative files
COMP[ARELEN] n
use generic positioning for compare length n on the record key (primary or
alternate) specified in the FIRST KEY option. The compare length is between 1
and 255 and must be less than or equal to the key specified.
EBCDICIN
translate input characters from EBCDIC to ASCII.
EXACT
exact positioning on the record key (primary or alternate) specified in the
FIRST KEY option.
FROMLAST
position on the last record in the key range specified in the FIRST KEY option.
RECIN n
the maximum number of bytes in an input record. n is between 1 and 4096.
When RECIN is not specified, the BLOCKIN value is used with a maximum of
4096.
REVERSE
reads the input file from the starting record in reverse order.
REWINDIN | NO REWINDIN (magnetic tapes only)
input tape is rewound (or not rewound) when the EOF is read from the tape. If
NO REWINDIN is specified, the tape remains positioned without rewinding.The
default is REWINDIN. This option also applies to labeled tapes.
SHARE
the file is to be opened in shared exclusion mode. The default is protected.
SKIPMATCH
position the input file to the record immediately following the one whose key
matches the specified key. The entire key must be supplied. If the file is not key
sequenced, an error 46 is returned.