HP Storage Mirroring Software - Manual (Page 121)

Job monitoring Page 120 of 135
1—Active. This indicates that the connection is functioning normally and
has no scheduling restrictions imposed on it at this time. (There may be
restrictions, but it is currently in a state that allows it to transmit.)
2—Paused. This indicates a connection that has been paused.
4—Scheduled. This indicates a connection that is not currently
transmitting due to scheduling restrictions (bandwidth limitations, time
frame limitations, and so on).
8—Error. This indicates a connection that is not transmitting because
something has gone wrong (for example, lost connection).
Only the Scheduled and Error states can coexist. All other states are
mutually exclusive. SNMP will display a dtconState of 12 when the
connection is in both a scheduled and an error state because this is the
sum of the two values (4 + 8).
Connection, dtconOpsInCmdQueue
The number of operations (create, modify, or delete) in the retransmit
queue on the source
Connection, dtconOpsInAckQueue
The number of operations (create, modify, or delete) waiting for verification
acknowledgements from the target
Connection, dtconOpsInRepQueue
The number of replication operations (create, modify, or delete) in the
queue
Connection, dtconOpsInMirQueue
The number of mirror operations (create, modify, or delete) in the queue
Connection, dtconBytesInRepQueue
The number of bytes in the replication queue
Connection, dtconBytesInMirQueue
The number of bytes in the mirror queue
Connection, dtconOpsTx
The total number of operations (create, modify, or delete) transmitted to the
target
Connection, dtconBytesTx
The total number of bytes transmitted to the target