HP Storage Mirroring Software User Manual
Page 33
Migration
Page 32 of 135
server, you will have to go through the job protection workflow again.
14. Once the validation is successful, click Next to continue.
15. At the Migration summary page, you can review the choices you have made and
you can also configure optional settings. If you need to make any changes to the
selections you made, click Back to return to the previous pages. If you want to
, click Configure. Once you have completed your
configuration, click Finish to start the migration.
16. Monitor the progress of the migration mirror on the
page.
17. When the migration mirror has completed, the target may or may not reboot
automatically depending on your selection for Wait for user intervention before
cutover. If you disabled user intervention, the target will reboot automatically to
complete the migration process. If you enabled user intervention, when the
migration mirror is complete, the status will change to Ready for Cutover. Use this
time to complete any necessary tasks. When you are ready to complete the
migration, click Cutover on the Monitor page toolbar to complete the migration
process, which will reboot the target.
Once the target server has been rebooted, it will become the source server.
Note: Because the Windows product activation is dependent on hardware, you may
need to reactivate your Windows registration after migration. Follow the on-
screen prompts to complete the reactivation.