HP Officejet 6500 User Manual

Page 114

Advertising
background image

To set up the device with DSL
1.
Obtain a DSL filter from your DSL provider.
2. Using the phone cord supplied in the box with the device, connect one end to the

open port on the DSL filter, and then connect the other end to the port labeled 1-LINE
on the back of the device.

NOTE: You might need to connect the supplied phone cord to the adapter
provided for your country/region.

If you do not use the supplied cord to connect from the DSL filter to the device,
you might not be able to fax successfully. This special phone cord is different from
the phone cords you might already have in your home or office.
As only one phone cord is supplied, you might need to obtain additional phone
cords for this setup.

3. Connect an additional phone cord from the DSL filter to the telephone wall jack.
4. Run a fax test.
If you encounter problems setting up the device with optional equipment, contact your
local service provider or vendor for further assistance.

Case C: Set up the device with a PBX phone system or an ISDN line

If you are using either a PBX phone system or an ISDN converter/terminal adapter, make
sure you do the following:

If you are using either a PBX or an ISDN converter/terminal adaptor, connect the
device to the port that is designated for fax and phone use. Also, make sure that the
terminal adapter is set to the correct switch type for your country/region, if possible.

NOTE: Some ISDN systems allow you to configure the ports for specific phone
equipment. For example, you might have assigned one port for telephone and
Group 3 fax and another port for multiple purposes. If you have problems when
connected to the fax/phone port of your ISDN converter, try using the port
designated for multiple purposes; it might be labeled "multi-combi" or something
similar.

If you are using a PBX phone system, set the call waiting tone to "off."

NOTE: Many digital PBX systems include a call-waiting tone that is set to "on"
by default. The call waiting tone will interfere with any fax transmission, and you
will not be able to send or receive faxes with the device. Refer to the
documentation that came with your PBX phone system for instructions on how to
turn off the call-waiting tone.

Chapter 8

110

Configure and manage

Advertising