HP Officejet 6500 - Manual (Page 48)

4 Scan
You can scan originals and send them to a variety of destinations, such as a folder on
the network or on a specific computer. You can use the device control panel, the HP
software, and TWAIN-compliant or WIA-compliant programs on a computer.
NOTE: If you do not install the optional HP software, you can only scan using the
Webscan feature. Webscan is available through the embedded Web server.
NOTE: If you are using HP Officejet 6500 E709a/E709d, you cannot scan and print
at the same time. The device must finish one job before it can begin another.
This section contains the following topics:
• Scan an original
• Use Webscan via embedded Web server
• Scan from a TWAIN-compliant or a WIA-compliant program
• Edit a scanned original
• Change scan settings
• Cancel a scan job
Scan an original
You can start a scan from a computer or from the device control panel. This section
explains how to scan from the device control panel only.
NOTE: You can also use the HP Solution Center to scan an image, including
panorama images. Using this software, you can edit a scanned image and create
special projects using a scanned image. For information about how to scan from the
computer, and how to adjust, resize, rotate, crop, and sharpen your scans, see the
onscreen help that came with your software.
To use the scan features, your device and computer must be connected and turned on.
The printer software must also be installed and running on your computer prior to
scanning. To verify that the printer software is running on a computer running Windows,
look for the device icon in the system tray at the lower-right side of the screen, near the
clock. To verify this on a computer using Mac OS X, open the HP Device Manager, and
click Scan Picture. If a scanner is available, it will launch the HP ScanPro application. If
it is not available, a message appears to let you know that a scanner was not found.
NOTE: Closing the HP Digital Imaging Monitor icon in your Windows system tray
can cause your device to lose some of its scan functionality and result in the No
Connection error message. If this happens, you can restore full functionality by
restarting your computer or by starting the HP Digital Imaging Monitor.
This section contains the following topics:
• Scan an original to a computer
• Scan an original to a memory device
44 Scan