HP NonStop G-Series - Manual (Page 244)

Time of Last Hard Reset The date and time of the last processor hard reset.
Firmware State
The state of the switch firmware.
Values: Active, Updating, In Test, Initializing, Unknown
Firmware
Version The VPROC of the firmware currently loaded on the switch logic board.
Default File Name The full path name of the default firmware file on the server.
Default File Version The version of the firmware in the default firmware file.
Compare State
The differences, if any, between the current and default firmware
versions.
Values
Configuration
Configuration Tag
A parameter used by SCF and the guided procedures that allows
SANMAN to select an appropriate switch configuration block (SCB)
from the switch configuration library. The selected SCB is subsequently
loaded on the specified switch. The configuration tag determines the
position of the cluster switch in the topology and the ServerNet node
numbers supported by the cluster switch.
Values
Example: 9721
Version
The VPROC of the configuration currently loaded on the switch logic
board.
Default File Name The full path name of the default configuration file on the server.
Default File Version The version of the configuration in the default configuration file.
Compare State
The differences, if any, between the current and default configuration
files.
Values
FPGA
Version
The VPROC of the FPGA (field programmable gate array) image
currently loaded on the switch logic board.
Default File Name The full path name of the default FPGA file on the server.
Default File Version The version of the FPGA image in the default FPGA file.
Compare State
The differences, if any, between the current and default FPGA versions.
Values