HP Scanjet N6010 Document Sheet-feed Scanner - Manual (Page 14)

Basic scanning
1. Load the originals. For more information, see Load originals .
2. Do one of the following:
–
Press the scanner button for the task you want to perform. For more information
see
Use the scanner buttons .
– Open a scanning software program and start the scan from the software. For
more information, see
Scan from other software programs .
Basic copying steps
1. Load the originals. For more information, see Load originals .
2.
Press the Copy ( ) button.
The document is scanned and one copy is printed on your default printer.
Use the HP Document Copy program to change the copy settings, such as number
of copies, single- or double-sided output, paper size, darkness, and black and white
or color. To open the HP Document Copy program, click Start, point to Programs
or All Programs, point to HP, point to Scanjet, point to N6010, and then click HP
Document Copy. After you make changes in the HP Document Copy program,
those settings will be used when you press the Copy button.
Use the scanner buttons
The following topics describe the front-panel scanner buttons. The default actions
described are those that occur if all of the software included on the HP Scanning Software
CD is installed.
●
Scan Document button
● Copy button
● Scan to PDF button
● Scan Business Card button
● Scanner Tools button
● Cancel button
Scan Document button
Use the upper-left Scan Document ( ) button to scan an original document. The default
mode is to scan to the NewSoft Presto! PageManager software, using the settings
selected for the scan that was done most recently in that application.
Chapter 2
12 HP Scanjet N6010 Sheetfeed Document Scanner