HP Scanjet N6010 Document Sheet-feed Scanner - Manual (Page 15)

Note If you do not have NewSoft Presto! PageManager installed, you are
prompted for which program to use for the scan.
When the scan is complete, the scanned image is displayed on the screen. You can save
the scan by dragging it to a location in the folder tree on the left-hand side of the screen.
Or you can choose one of the program icons at the bottom of the screen to launch that
program and open the scanned image within that program.
By default, the NewSoft Presto! PageManager software uses the settings that were used
for the most recent scan. You can use the PageManager menu options to change the
default settings as needed. See the PageManager online Help to learn about these menu
options.
If you want to map the Scan Document button to a different scanning software program,
use the Scanner Tools Utility. See the Scanner Tools Utility online Help for details. For
information about opening the Scanner Tools Utility, see
Scanner Tools Utility .
Copy button
Use the upper-right Copy button ( ) to scan an original document and send it to the
computer's default printer.
When you press the Copy button, the HP Document Copy utility automatically sends the
scanned document to your default printer with the following default settings, or whatever
settings have most recently been configured in the HP Document Copy program.
●
Color: If you have a color printer, the copy will be printed in color.
● Simplex (single-sided): The scanner will scan and print only the front side of the
original.
If you want to make changes to these default settings, you can click Cancel in the
Copying... dialog box that displays after you press the Copy button on the scanner to
access the HP Document Copy program. You can then select the number of copies you
want to make, select double-sided (duplex) copies, and configure other copy settings. If
you are connected to a network with more than one printer, you can also select a different
printer. Click Start when you are ready to make the copies.
If you want the HP Document Copy utility to always prompt for your settings whenever
the Copy button is pressed, open the Scanner Tools Utility and clear the Copy to
printer... check box on the Buttons tab.
User Guide 13