HP Scanjet N6010 Document Sheet-feed Scanner - Manual (Page 22)

3. Use an HP paper-path cleaning cloth to clean the feed roller and the small rubber
pad that is located below it.
Note If you do not have an HP paper-path cleaning cloth, use a lint-free
cloth that has been dampened with isopropyl alcohol.
4. Wipe the area around the small rubber pad to remove any paper dust.
5. Raise the feed-roller assembly cover to close it.
6. Close the scanner hatch.
Note HP recommends that you replace the feed-roller assembly every 75,000
scans. Use the Scanner Tools Utility to keep track of the scan count. For more
information, see
Replace the feed-roller assembly or the Scanner Tools Utility
help.
Chapter 3
20 HP Scanjet N6010 Sheetfeed Document Scanner