HP Scanjet N6010 Document Sheet-feed Scanner - Manual (Page 9)

● Feed-Roller Assembly Maintenance: This section indicates when the scanner
feed rollers were last replaced and lets you know when it is time for them to be
replaced. The recommended replacement interval will vary based on number of
pages scanned, number of paper jams, and paper errors. Click the Record
Maintenance button to reset the scanned pages count and record the date when
the feed rollers are replaced.
● Instant Lamp On: Select the Instant Lamp On check box to keep the scanner lamp
warm when the scanner is turned on.
Clearing this check box saves energy when the scanner is not in use. Because the
scanner lamp turns off after a period of inactivity, it will need to warm up before
scanning again.
For more information about scanner maintenance, see Care and maintenance .
Where to get additional information
The scanner comes with several sources of additional information:
●
Printable version of this guide
● HP Scanjet N6010 Setup and Support Guide
● Online help
Printable version of this guide
For a PDF version of this guide that you can print, click Start, point to Programs or All
Programs, point to HP, point to Scanjet, point to N6010, and then click User Guide. Or,
use the instructions that follow:
1.
Insert the HP Scanning Software CD that came with the scanner into the computer
CD drive.
Wait for the installation dialog box to display.
2. Click View or print guides.
A list of languages is displayed.
3. Click the language that you want.
A list of guides is displayed.
4. Click User Guide.
HP Scanjet N6010 Setup and Support Guide
Use the printed HP Scanjet N6010 Setup and Support Guide that came with the scanner
to set up and connect the scanner hardware, test the installation, and troubleshoot
installation problems.
For a printable PDF version of the guide, click Start, point to Programs or All
Programs, point to HP, point to Scanjet, point to N6010, and then click Setup and
Support Guide. Or, use the instructions that follow:
1.
Insert the HP Scanning Software CD that came with the scanner into the computer
CD drive.
Wait for the installation dialog box to display.
2. Click View or print guides.
A list of languages is displayed.
User Guide 7