AMX MAX-CSE - Manual (Page 32)

MAX-CSE Web Interface
26 MAX-CSE/MAX-CSD10 Operation/Reference Guide
Stream Profiles Page
The Stream Profiles page (FIG. 16) is accessed by clicking on the Stream Set-Up button in the
Navigation Bar. The Stream Profiles page allows users (with the proper access rights) both to configure
the properties of the outgoing media stream and set up the properties associated with communicating that
stream to an external IP-enabled device capable of receiving and processing the data.
UDP (User Datagram Protocol) is a connectionless protocol, much like TCP, that runs on top
of IP networks. Unlike TCP/IP, UDP/IP provides a direct way to send and receive datagrams
over an IP network. It's primarily used for broadcasting messages over a network. Data is sent
as a Transport Stream by using only the MPEG-2 codec.
FIG. 16 Stream Profiles page
IP Multicasting is supported under both the UPD and RTP communication protocols.