AMX MAX-CSE - Manual (Page 45)

MAX-CSD10 Web Interface
39 MAX-CSE/MAX-CSD10 Operation/Reference Guide
MAX-CSD10 Web Interface
The browser-based UI for the MAX-CSD10 Decoder, known as the Decoder Manager (FIG. 22), is
significantly different from the interface for the MAX-CSE Encoder. However, many of the same
functions are available to the MAX-CSD10 from the Decoder Manager.
As with the MAX-CSE browser-based UI, the default page for the MAX-CSD10 is the Administration
page.
MAX-CSD10 User Interface Overview and Features
FIG. 22 Decoder Manager for the MAX-CSD10 (showing the initial screen)
User Interface Features
Feature Description
Browser Address field Typically located at the top of the browser window, this dynamic
frame reflects the current IP Address being used by the
communicating MAX device and the currently active XML UI
page.
Navigation frame: Located at the top of the browser window, this static frame allows
a user to navigate to any of the different configuration pages
found within the UI. Since this frame is static, it appears
on-screen no matter what page is currently active.
Admin • This link launches the Administration page, which displays an
overview of the MAX firmware and project information.
Stream Selector • This link launches the Stream Selector page, which provides
the user with the ability to choose from a list of available input
streams.
Stream Set-up • This link launches the Stream Set-up page, which provides the
user with the ability to select the Run Mode of the incoming
stream and the server to which the decoded stream will go.
Audio/Video • This link launches the Audio/Video page, which provides the
user with the ability to select the video port to be used.
NetLinx • This link launches the NetLinx Settings page which provides the
user with the ability to enter the communication parameters
necessary to connect a MAX-CSD10 with a target Master.
IP Settings • This link launches the IP Settings page which provides the user
with the ability to assign the method of communication used by
the target MAX unit, along with its associated IP parameters.
User • This link launches the User page which provides the user with
the ability to alter the current Username/Password information
required to gain entry to the UI pages and make modifications.